OverviewStorage networks become more and more complex. If you need to easily expand storage capacity while providing uninterrupted high-performance data access across your LAN. You may want to consider a NAS (Network Attached Storage) appliance. When budgets are tight and a quick fix is required, a NAS appliance is a low-cost, efficient solution to dodge that network-to-storage logjam. That's why more and more users select NAS architecture as their storage networking. The EN-T800A-CM (SATA II NAS Subsystem) is a reliable, cost-effective way to add storage to the network. It comes with 8 drive trays accommodating 3.5" SATA II drives while SCA II single connector architecture enables true hot swap capability. Built-in Intel Celeron 1.6G CPU (or above), up to 4GB DDR2 533/667MHz SDRAM and two Gigabit Ethernet ports offers high performance NAS platform. Linux based embedded OS design, it can boot without HDD, FDD or CD-ROM to guarantee reliability and quick boot. |
|
||||||||||||||||||||||||
NAS Features
- Supports up to eight hot-swappable SATA II hard drives
- Supports RAID levels 0, 1 ,5, 6, 10, Linear(JBOD)
- Linux based embedded OS design
- Provides file access services to multiple users over the LAN, the intranet and / or the internet
- Multi protocol support (TCP / IP, DHCP, Apple Talk, Mac zone,
SMB, NFS, CIFS, AFP over TCP / IP)
Specifications
| EN-T800A-CM / EN-T800A-CM-R (redundant PSU) |
| Hardware Platform |
| Intel Celeron 1.6G CPU (or above) |
| Cache memory：1GB ~ 4GB DDR2 533/667MHz |
| Supports 8 SAS/SATA II hard drives |
| Two Gigabit Ethernet port |
| Environmental monitoring unit |
| 400W Power Supply with PFC or 500W * 2 power supply with PFC |
| Storage |
| Equipped with RAID function to offer fault tolerant data protection |
| Supports RAID levels 0, 1, 5, 6, 10, Linear (JBOD) |
| Volume Management |
| Disk usage statistics |
| Connectivity |
| SMB over TCP / IP |
| NFS over UDP / IP |
| CIFS over TCP / IP |
| NAT |
| DHCP, HTTP, FTP |
| Internet Server |
| Unit acts as a DHCP server |
| Unit acts as a master browser |
| Share level security |
| User ID security for NFS |
| Macintosh Support |
| AFP over Apple Talk |
| AFP over TCP / IP |
| Mac zones |
| iTune service |
| General |
| File Server Independent |
| Localized language support |
| Support Quick setup |
| Supports trunking / load balance / fail over / LACP(802.3ad) |
| Support UPS management |
| Support USB printer server |
| Support BT download |
| iSCSI Target |
| Support U-Share |
| OS Platform Support |
| Windows, Linux, Mac |
| System Management |
| Windows and Macintosh Client Discover Utility Tool |
| Automatic IP address configuration |
| Management through Web browser |
| Flash upgradeable unit |
| Supports Microsoft ADS / PDC and Unix NIS accounts import |
| Fail-free online firmware upgrade |
| Unicode support | Backup / Restore support |
| Backup Solution |
| Power requirements |
| AC 100V ~ 240V Full Range (10A~6A / 8A ~ 4A, 60 ~ 50Hz) |
| Environmental |
| Relative Humidity: 10%~85% Non-condensing Operating Temp: 10°C ~ 40°C (50°F ~ 104°F) |
| Physical Dimension |
| 360 (H) x 190 (W) x 280 (D) mm |
| Weight: 12.5 Kg (without disk drives) |
